Next >>

STEP 1 (at meter)

 

Action /
Key Entry

Meter Display
 

Display Description /
User Action

       
   

  1  

 Write your Postage-On-Call account number in the space provided on the worksheet.
 

  2  

Press FCN key
    then
Press the ADD$/9 key

  P00
  PIN ---------------------------

POC Pin Number Requested
 

Note :

  • If the display shows P-20 or P-30, refer to the Troubleshooting section in the POSTAGE-ON-CALL Operator Instructions.
  • If "INVALID" displayed, press the C key, then press the FCN key followed by the RESET/1 key.

    •  

      3  

    		 Enter POC Pin

      P01
      AUTOSET                      

    If you want to change your Postage-On-Call Pin refer to the POSTAGE-ON-CALL Operator Instructions.

     

      4  

    		 Press the E key

      P01
      SN               4100000

    Meter Serial Number
    Record on Worksheet

     

      5  

    		 Press the E key

      P02
      DES                  1.000

    		Descending Register
    Record on Worksheet
    (include all digits displayed)
     

      6  

    		 Press the E key

      P03
      ASC                500.000

    		Ascending Register
    Record on Worksheet
    (include all digits displayed)
     

      7  

    		 Press the E key

      P04
      $                       0.000

    		Prompt for Reset Amount
    Record your Reset Amount on Worksheet
    Note : If you have not completed a prior setting procedure, the meter will display the previously selected reset amount at the P04 prompt.
  • If the reset amount is correct, press the  E key to go directly to the P06 prompt to enter a setting code.
  • If the reset amount is incorrect, press the  C key to enter a different reset amount.  It must be the same amount you request from the Postage-On-Call Data Center, or the meter will not accept the setting code.
    •  

      8  

    Enter Reset Amount 
    then
    Press the E key

      P05
      VF                      0.000

    		Prompt for Reset Amount Verification
     

      8  

    Enter Reset Amount again 
    then
    Press the E key

      P06
      ---------------                    

    		Prompt for Setting Code entry
     
    Note : If the verify amount does not match the reset amount previously entered, the meter display will return to the P04 ADD$ prompt.  Press E to accept the new amount displayed or press C to enter a new reset amount.

    Next >>